Experimental study of the operation of a Stirling engine with a solar concentrator and an additional energy source
DOI:
https://doi.org/10.31548/energiya4(80).2025.099Abstract
The efficiency of solar energy is limited by the natural variability of solar radiation levels. The Stirling engine is a promising solution for solar energy systems, especially when using concentrators, such as a Fresnel lens. The main obstacle to the widespread implementation of such systems is their dependence on the stability of solar radiation.
The purpose of the research is to create an experimental stand and methodology to determine the feasibility of using an additional energy source (electric heater) to prevent the shutdown of the Stirling engine, which uses concentrated solar radiation using a Fresnel lens as the main source of heat.
The paper presents an experimental study of the Stirling engine, which includes the study of the effect of variable insolation and the assessment of the efficiency of using an electric heater as an additional energy source (AES) to improve system stability. A series of experiments was conducted with different durations of insolation interruption (20, 40 and 60 s). The results confirmed the ability of the AES to prevent engine shutdown and increase the total energy produced by 47 %, 90 % and 130 % for the respective intervals.
Key words: Stirling engine, Fresnel lens, additional energy source, power stabilization, solar energy, experimental stand
References
1. Cardozo, E, Erlich, C, Malmquist, A, Alejo, L. (2014). Integration of a wood pellet burner and a Stirling engine to produce residential heat and power. Appl Therm Eng., 73(1), 671-680. doi: https://doi.org/10.1016/j.applthermaleng.2014.08.024.
2. Thiers, S, Aoun, B, Peuportier, B. (2010). Experimental characterization, modeling and simulation of a wood pellet micro-combined heat and power unit used as a heat source for a residential building. Energy Build., 42(6), 896-903. doi: https://doi.org/10.1016/j.enbuild.2009.12.011.
3. Martin Nilsson (2024). Simplified pumped thermal energy storage using a two-way Stirling cycle. Journal of Energy Storage, 73(2), 108994. doi: https://doi.org/10.1016/j.est.2023.108994.
Published
Issue
Section
License
Copyright (c) 2025 Energy and Automation
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Relationship between right holders and users shall be governed by the terms of the license Creative Commons Attribution – non-commercial – Distribution On Same Conditions 4.0 international (CC BY-NC-SA 4.0):https://creativecommons.org/licenses/by-nc-sa/4.0/deed.uk
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
